Latest Comments

In response to: 4 Universes DMX ArtNET Node LCD

Comment from:

Olá mattfabiani

O sistema não utiliza quaisquer botões. A configuração do IP da unidade é feito via web interface.
Até agora não houve oportunidade de fazer qualquer actualização, continuo a usar a unidade sem qualquer problema (com apenas 3 universos activos).

09/01/15 @ 02:45

In response to: 4 Universes DMX ArtNET Node LCD

Comment from:
mattfabiani

Caneira Olá, este post ja tem um par de anos, sem chance para fazer quaisquer atualizações, melhorias? Seu esquema com MAX485 tem alguns botões que fazem? Como é o esquema que você criou?

05/19/15 @ 19:49

In response to: AuriolDuino - RF receiver Auriol H13726A

Comment from: Oliveira Martins
Oliveira Martins

A qualidade do kit é excelente, o receptor é muito mais sencível do que o da estação original. A minha velhinha auriol ganhou uma nova vida.

01/09/14 @ 00:09

In response to: 4 Universes DMX ArtNET Node LCD

Comment from:

Hi Lightingdude

If you want a reliable use of 4 universes, my sugestion is to use 2 Arduinos with 2 Universes in each one, or even better 4 Arduinos with one Universe each.
You can use a cheap router with 5 ports to connect the two or four Arduinos and use a single ArtNet line from your controler, also connected to the router.

Thank you for your interest in this project. For more information in English language, you can also visit the site of the original author (Toni Merino) at, http://www.deskontrol.net/blog/arduino-based-dmx-artnet-node/

03/11/13 @ 02:52

In response to: 4 Universes DMX ArtNET Node LCD

Comment from:

Caro Deives Bender

Tal como é dito no artigo, deverá a usar o Arduino IDE v0.23 para compilar o código.

Algumas rotinas relacionadas com a livraria ethernet mudaram a partir da versão IDE 1.0 que está a usar, o que origina o erro que lhe está a acontecer.

Baixe o Arduino IDE v0.23 e verá que o codigo compila sem problemas.

03/11/13 @ 02:43

In response to: 4 Universes DMX ArtNET Node LCD

Comment from: Deives  
Deives

Olá amigo, achei muito bacana o seu projeto, estou no Brasil e estou tentando montar o seu projeto aqui para mim testar…
Porém encontrei um problema ao compilar os arquivos ‘’artnet-node_LCD_v1.13.zip'’
O erro é o seguinte:

artnet_node.pde: In function ‘void setup()’:
artnet_node:268: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.

artnet_node.pde: In function ‘void loop()’:
artnet_node:275: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.

artnet_node.pde: In function ‘void handle_packet()’:
artnet_node:281: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.

artnet_node.pde: In function ‘void send_reply(uint8_t, uint8_t*, uint16_t)’:
artnet_node:382: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.

artnet_node:386: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library has been renamed to EthernetUdp.

O que poderia ser ? como posso resolver?

Muito obrigado
At. Deives Bender

*****************************************************************************************************
Hello friend, I found your very cool project, I am in Brazil and I’m trying to assemble your project here for me to test …
But I found a problem when compiling files artnet-node_LCD_v1.13.zip”'’
The error is the following:

artnet_node.pde: In function ‘void setup ()’:
artnet_node: 268: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library Has Been renamed to EthernetUdp.

artnet_node.pde: In function ‘void loop ()’:
artnet_node: 275: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library Has Been renamed to EthernetUdp.

artnet_node.pde: In function ‘void handle_packet ()’:
artnet_node: 281: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library Has Been renamed to EthernetUdp.

artnet_node.pde: In function ‘void send_reply (uint8_t, uint8_t *, uint16_t)’:
artnet_node: 382: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library Has Been renamed to EthernetUdp.

artnet_node: 386: error: ‘Udp’ was not declared in this scope

As of Arduino 1.0, the Udp class in the Ethernet library Has Been renamed to EthernetUdp.

What could it be? how can I solve?

thank you very much
Acts Deives Bender

02/09/13 @ 22:11

In response to: 4 Universes DMX ArtNET Node LCD

Comment from: Lightingdude
Lightingdude
5 stars

I’m very interested in your progress on this! I’ve been looking at DIY ArtNET nodes for awhile, but it’s not really worth my time to do unless I can get 4 universes (as opposed to the 2 direct outs that my board already has).

Now, forgive my ignorance, but could we get more reliable operation by using two Arduinos? They’re inexpensive, but I don’t know if it’s possible to output universes 0-1 off one, and pass the data for 2-3 off the second board.

Thoughts?

01/24/13 @ 06:46